(Answered)-can someone help me solve these problems? thanks! Question#(1). A - (2025 Updated Original AI-Free Solution

Discipline:

Type of Paper:

Academic Level: Undergrad. (yrs 3-4)

Paper Format: APA

Pages: 5 Words: 1375

Buy For $11.00 Order Custom Paper

Buy For $11.00

Question

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? can someone help me solve these problems? thanks!?

Question#(1).?? A sample containing oil, gas and water weighs X grams, the gas is evacuated and filled with water. The volume of water is X cc. IT weighs X grams after the water is removed and only oil is remaining. The sample is weighted against dry and weighs X grams.

Find:

Pore VolumePorosityMetrix VolumeDensity and LithologyQuestions #(2). A well is producing 42 API oil and 0.74 specific gravity gas through a separator ( and P , SCF/STB). Formation pressure and temperature are 8200 psi and 220 F. Estimate:ST GOR

? *?Bubble-point pressure

Initial oil formation Volume factorTwo phase formation Volume FactorIsothermal compressibilityOil viscosity

Question# (3). ?comp.??? Mole Wt.

??????? H2S??????? 15

???????? CO2????? 20

????????? N2?????? 20

??????? C1??? ?????120

??????? C2??????? 40

??????? C3??????? 40

??????? C4????????? 35

??????? C7+????????? 25

Reservoir conditions: 5,000ft LX 300ft W x 200tf D

P1=180

P2 =1200

T F =210 F

K = 20 md

R =?

Api = 42

SGg = 0.756

Find :
a. Qg?in?lbmass/day?and?lbmole/day
b. When will this well stop producing if the filed is 2400 acres
c. Find the isothermal compressibility factor

Question #(4). A sand pack of uniform fine grains has an effective porosity of 0.25. The average grain size diameter is approximately 0.12mm. Calculate the permeability of the sandstone using Kozeny-Carman equation. This sandstone comes from a formation (T , Thickness ft) that is producing 40 API crude oil (Bio .3 bbl./STB) through a well (pressure psi, Diameter -in., and drainage area acres), using the figure above, find the oil and gas production rates?